Presentation of CAD/Annotations/Markups - Detailed Proposal

1. Proposed Profile: Presentation of CAD/Annotations/Markups

Proposal Editor: Michael Planchart/Peter Maton
Profile Editor:
Domain: Radiology

Summary

PACS image viewing workstations utilize inconsistent means to display Chest CAD/Annotations/Markups.

DICOM has defined the Chest CAD SR to convey the detection and analysis results of a chest CAD device. If image viewing workstation vendors had a "one-way" approach defined through an IHE harmonization profile it would be easier for them to be encouraged to adopt it. The "Presentation of CAD/Annotations/Markups" profile would require compliant workstations to consume the Chest CAD SR to toggle on/off the markups.

Healthcare providers are showing continued interest in the use of CAD to improve the detection of cancer nodules and other abnormalities in Chest X-Rays.

DICOM offers too many different approaches to the presentation of CAD/Annotations/Markups and have been the primary cause that each vendor implements the presentation of the markups in various ways and often each one of them interpreting differently the same standard or approach. By means of an IHE harmonization profile they would have one defined way of implementing the most common use cases.

The Problem

CAD and clinical processing applications create processed images with annotations/markups. Different products are using different mechanisms for the markup, e.g.:

burned into the DICOM image,

encoded in the image overlay,

encoded in separate presentation state graphics,

encoded in a separate SR,

rendered onto the image in a separate JPEG

With so many mechanisms, display systems support some of them poorly or not at all, so workflow is disrupted and key information may be inaccessible. The variability also makes it very difficult to create robust hanging protocols.

Of all the methods available the DICOM Structured Report (SR) is the preferred one and by industry-wide consensus, to contain the encoded markups.

Key Use Cases

Use Case #1 DR/CR Chest X-Ray Lung CAD - Results Stored at Image Archive (PACS):

Chest X-Ray Lung CAD devices process the digital images of AP/PA projections (frontal chest) obtained from the DR/CR modalities in order to detect nodules or abnormalities and to identify and mark the coordinates of the regions of interest (ROI).

The CAD processed output shall be delivered as a DICOM Chest CAD SR SOP Class to the Image Archive (PACS server).

The Image Display shall provide the means of toggling on off the markers atop the source image. The markers should be off by default on the PACS viewing workstation. The SR should be independently toggled from other overlays.

Use Case #2 DR/CR Chest X-Ray Lung CAD - Results are not Stored at Image Archive (PACS):

Chest X-Ray Lung CAD devices process the digital images of AP/PA projections (frontal chest) obtained from the DR/CR Acquisition Modalities in order to detect nodules or abnormalities and to identify and mark the coordinates of the regions of interest (ROI).

The CAD processed output shall be delivered as a DICOM Chest CAD SR SOP Class to the Image Displays (PACS image viewing workstations).

The Image Display shall provide the means of toggling on off the markers atop the source image. The markers should be off by default on the PACS viewing workstation. The SR should be independently toggled from other overlays.

Standards & Systems

DICOM – Chest CAD SR SOP Class
Existing IHE Actors and Transactions

Technical Approach

<This section can be very short but include as much detail as you like. The Technical Committee will flesh it out when doing the effort estimation.>

Existing actors

Acquisition Modalities (CR/DR)
Image Creator (Chest CAD Device)
Evidence Creator (Chest CAD Device)
Image Display (PACS Image Viewing Workstation)
Image Archive (PACS)

New actors

None identified.

Existing transactions

RAD-10: Storage Commitment

         Actor: Acquisition Modality (CR and/or DR)
         Role:  Make requests for storage commitment to the Evidence Creator for the images,

         Actor: Evidence Creator (Chest CAD Device)
         Role:  Make requests for storage commitment to the Image Manager for the images, and Evidence Documents (Chest CAD Structured Reports),

RAD-26: Query Reports

RAD-43: Evidence Documents

RAD-44: Query Evidence Documents

RAD-45: Retrieve Evidence Documents

New transactions (standards used)

None identified.

Impact on existing integration profiles

There are no anticipated impacts on existing profiles since none of them address the use cases described.

New integration profiles needed

Presentation of Chest CAD Annotations/Markups.

Ideally a more generic approach could be chosen but since DICOM defines separately each CAD Structured Report there is no easy way of doing this.

Breakdown of tasks that need to be accomplished

<A list of tasks would be helpful for the technical committee who will have to estimate the effort required to design, review and implement the profile.>

Support & Resources

CAD Providers:
- Riverain Medical

Image Display Providers:
- Agfa
- ASPYRA
- GE
- McKesson

Risks

Currently there are no risks identified. DICOM has the standard defined for the presentation of Chest X-Ray CAD/Annotations/Markups which is the Chest CAD SR SOP Class.

The Profile would simply provide a clear approach to the vendors of how to interoperate with Chest CAD devices as Evidence Creators.

Open Issues

<Point out any key issues or design problems. This will be helpful for estimating the amount of work and demonstrates thought has already gone into the candidate profile.>

Tech Cmte Evaluation

<The technical committee will use this area to record details of the effort estimation, etc.>

Effort Evaluation (as a % of Tech Cmte Bandwidth):

35% for ...

Responses to Issues:

See italics in Risk and Open Issue sections

Candidate Editor:

TBA